English French Italian Spanish Portuguese German Korean Russian Persia Arabic Japanese Chinese
 
Spyphone/Interceptor Setup

Introduction

Spy Phone allows the user to call the target phone which will result in the phone answering in ghost mode, i.e. answers at zero ring, without lights, call notifications and log creation. No visual or physical changes can be noticed on the target phone.

Interceptor, which also includes the Spy Phone, enables the user to call the target phone and listen to the conversations of the incoming or outgoing calls. Incase there are no conversations that are taking place, the target phone responds in Ghost Mode allowing the user to listen in to the surroundings. Please also note that both Spy Phone and Interceptor send SMS to the pre-defined number as soon as an incoming or outgoing call is connected.

1) Remote Management
You now have the ability to remotely configure the phone. You can send a special SMS to perform the following functions on the phone:

  • Activate the Software
  • Deactivate the Software
  • Change the Secret code
  • Change the Pre-Defined Number
  • Query for the Status of the phone
2) Timing
To avoid any complications please follow this precaution:
Configuration SMS should be sent with an interval of 30 Seconds. For e.g. The user sends an SMS to deactivate the program on the target phone. If the user now wants to activate the program on the target phone, then they should wait for 30 seconds before sending this SMS. In other words two configuration SMS should be at least 30seconds apart.

Room Monitor or Interception calls should also be made at an interval of 30 seconds. For e.g. A Room Monitor call is placed. The user disconnects this call. The next Room Monitor call should be placed after 30 seconds.

3) Stealth Features
  • No lights or visual changes can be seen on the Mobile Equipment (ME) when a Room Monitor or Interception call is placed.
  • No Log creation for Incoming Room Monitor Call, Interception Call, Configuration SMS or Intercepted SMS.
  • Deactivate the Software
  • Change the Secret code
  • Change the Pre-Defined Number
  • Query for the Status of the phone
4) Other Features
  • Any Key Disconnect: When a Room Monitor is placed or a call has been intercepted, these calls will be disconnected as soon as the user presses a key to avoid any suspicion to the Target User.
  • Caller Breakthrough: If an incoming call arrives to the target phone, while a Room Monitor call is in progress, the Room Monitor Call will automatically disconnect and let the phone ring as normal.
  • Activate, Deactivate, Change the Secret Code or the Pre-defined number at any time from any phone all over the world. No restrictions.

Configuration and Setup

The following procedure governs the Remote Configuration SMS:

  • Configuration SMS begin with * and also end with a *
  • Commands and text within the SMS is separated by a #
The following table explains the commands:
0 Deactivate
1 Activate
2 Change Secret Code
3 Change Pre-Defined Number
4 Query Status
5 Activate/Deactivate on boot SMS (Active by default)

Example Remote Configuration SMS for Spy Phone/Interceptor function with code as 123456789:

  • To Deactivate: *#123456789#0*
  • To Activate: *#123456789#1*
  • To Change Secret Code: *#123456789#2#987654321* (This will change the pre-defined code from 123456789 to 987654321)
  • To Set/Change Pre-defined Number: *#123456789#3#5550001*
  • To Query Phone Status: *#123456789#4*
  • To Activate on boot SMS: *#123456789#5#1*
  • To de-Activate on boot SMS: *#123456789#5#0*
To setup the Spy Phone or Interceptor Software follow the 4 steps below:

1) Setup your code
Send an SMS from any phone with the following body to the target phone.

a. *#< 9 Digit Code>#0*
b. The 9 Digit Code can be any Number or Alphabets. The following are valid examples of codes (Do not use any special characters in the code):

  • *#123456789#0*
  • *#abcdefghi#0*
  • *#a1b2c3d4f#0*
c. Let's assume that you have sent the following code: *#123456789#0*. This will setup your code to 123456789 and at the same time ensuring that the function is still inactive.
d. Wait for 30 seconds after sending this SMS.

2) Setup the Pre-defined number
Now that you have setup the code, we need to fix the pre-defined number. Send the following SMS from any phone:
*#123456789#3#5551234*
Wait for 30 seconds after sending this SMS! This will setup your pre-defined number as 5551234.

3) Activate Spy Phone or Interceptor function
To activate Spy Phone or Interceptor function send the following SMS:
*#123456789#1*
Wait for 30 seconds after sending this SMS.

4) Check Status of the phone and network information
If you wish to check the status of the phone and obtain network information of the phone, end the following SMS:
*#123456789#4*
Wait for 30 seconds after sending this SMS. In this time the Target Phone will respond with an SMS with the following Information:
Phone is: SWITCH ON
Application Status: Running
Date and Time: DD/MM/YYYY, HH:MM:SS
IMEI: 123456789012345
Signal Strength: XX%
You can now call the phone from the pre-defined number to ensure that Room Monitor is working properly.

Examples

If you wish to change the number or pre-defined code at any time you just need to send an SMS to change the codes, without activating or deactivating the functions on the target phone.

1) Change Code
If you want to change the code, send an SMS with the following body:
*#123456789#2#000000000*
This will change the original code, i.e. 123456789 to the new code, i.e. 000000000.

2) Change Pre-defined number
If you wish to change the pre-defined number, send an SMS with the following body:
*#123456789#3#5550000*
(assuming that the current code is 123456789).

3) De-Activate on Boot SMS
Please note that "on boot" SMS sending is activated as a default option. To de-activate "on boot" SMS send an SMS with the following body:
*#123456789#5#0*

4) Activate on Boot SMS
Please note that "on boot" SMS sending is activated as a default option. To activate "on boot" SMS send an SMS with the following body:
*#123456789#5#1*


Fax: +39 080 40731187
Management: +39 080 3026530


The customer is responsible for the knowledge of the laws that rule the use of these devices in his country.

ENDOACUSTICA DECLINES ANY RESPONSIBILITY FOR ILLEGAL USE OF THESE DEVICES.

WARNING! Using surveillance devices, intercepting and/or recording audio conversations, without the consent of all the parties involved might be illegal in your country. Check local laws before using our spyphones.






Design by www.spy-phones.eu