English French Italian Spanish Portuguese German Korean Russian Persia Arabic Japanese Chinese
 
Location by SMS Setup

Introduction

This release enables the user from the pre-defined number to send an SMS to the target phone and get the GSM location of the target phone.

The user from the pre-defined number will send an SMS with a code and receive the following information as a response:
Network: XXX
LAC: XXX
CI: XXX
Signal Strenght: XX%
Location Name: XXXXXXXXXX
Current Time: hh:mm:ss
LAC is Location Area Code
CI is the Cell ID
Signal Strength is the current strength of the tower that the phone is bound to
Location name is the name of the area that the network provider sends to the phone
Current Time is the time in that moment

All this information is provided exactly as the network provider sends to the SIM card of the phone.

1) Remote Management
You now have the ability to remotely configure the phone. You can send a special SMS to perform the following functions on the phone:

  • Activate the location function
  • Deactivate the location function
  • Change the Secret code to manage the function
  • Change the Pre-Defined Number
  • Query for the Status of the location function on the phone
  • Query for Location Information of the phone
2) Timing
To avoid any complications please follow this precaution:
Configuration SMS should be sent with an interval of 30 Seconds. For e.g. The user sends an SMS to deactivate the program on the target phone. If the user now wants to activate the program on the target phone, then they should wait for 30 seconds before sending this SMS. In other words two configuration SMS should be at least 30seconds apart.

3) Stealth Features
  • The Mobile Equipment (ME) continues to be in switched off when a Room Monitor call is placed.
  • No Log creation for Incoming Room Monitor Call, or Configuration SMS.
  • No Installation Logs.
  • Nothing can be traced inside the phone.
  • Functions silently start up on phone boot or restart; if it is in Active State.
  • Configuration SMS when arrive on the target phone cannot be viewed in the Inbox nor do they represent any visual changes on the screen.
4) Other Features
Activate, Deactivate, Change the Secret Code, the Pre-defined number or Query the Mobile Equipment at any time from any phone all over the world. No restrictions.

Configuration and Setup

The following procedure governs the Remote Configuration SMS:

  • Configuration SMS begin with * and also end with a *
  • Commands and text within the SMS is separated by a +
The following table explains the commands:
0 Deactivate
1 Activate
2 Change Secret Code
3 Change Pre-Defined Number
4 Query Location Information
Example Remote Configuration SMS for Location by SMS Software with code as 123456789:

  • To Deactivate the location function: *+123456789+0*
  • To Activate the location function: *+123456789+1*
  • To Change Secret Code: *+123456789+2+987654321* (This will change the pre-defined code from 123456789 to 987654321)
  • To Set/Change Pre-defined Number: *+123456789+3+5550001*
  • To Query Phone Status: *+123456789+4*
To setup the Spy Phone or Interceptor Software follow the 4 steps below:

1) Setup your code
Send an SMS from any phone with the following body to the target phone.

a. *+< 9 Digit Code>+0*
b. The 9 Digit Code can be any Number or Alphabets. The following are valid examples of codes (Do not use any special characters in the code):

  • *+123456789+0*
  • *+abcdefghi+0*
  • *+a1b2c3d4f+0*
c. Let's assume that you have sent the following code: *+123456789+0*. This will setup your code to 123456789 and at the same time ensuring that the function is still inactive.
d. Wait for 30 seconds after sending this SMS.

2) Setup the Pre-defined number
Now that you have setup the code, we need to fix the pre-defined number. Send the following SMS from any phone:
*+123456789+3+5551234*
Wait for 30 seconds after sending this SMS!
This will setup your pre-defined number as 5551234.

3) Activate the Location function
To activate the location function, send the following SMS:
*+123456789+1*
Wait for 30 seconds after sending this SMS.

4) Query Mobile Equipment for the Location Information
If you wish to check the location of the phone and obtain network information of the phone, end the following SMS:
*+123456789+4*
Wait for 30 seconds after sending this SMS.
In this time the Target Phone will respond with an SMS with the following Information:
Network: XXX
LAC: XXX
CI: XXX
Signal Strenght: XX%
Location Name: XXXXXXXXXX
Current Time: hh:mm:ss

Examples

If you wish to change the number or pre-defined code at any time you just need to send an SMS to change the codes, without activating or deactivating the functions on the target phone.

1) Change Code
If you want to change the code, send an SMS with the following body:
*+123456789+2+000000000*
This will change the original code, i.e. 123456789 to the new code, i.e. 000000000.

2) Change Pre-defined number
If you wish to change the pre-defined number, send an SMS with the following body:
*+123456789+3+5550000*
(assuming that the current code is 123456789).

Fax: +39 080 40731187
Management: +39 080 3026530


The customer is responsible for the knowledge of the laws that rule the use of these devices in his country.

ENDOACUSTICA DECLINES ANY RESPONSIBILITY FOR ILLEGAL USE OF THESE DEVICES.

WARNING! Using surveillance devices, intercepting and/or recording audio conversations, without the consent of all the parties involved might be illegal in your country. Check local laws before using our spyphones.






Design by www.spy-phones.eu